1Press the [Down arrow key/Menu] key.

2Press the [Up arrow key] or [Down arrow key/Menu] key to display [Maintenance], and then press the [#Enter] key.

Menu:              
Maintenance        

3Press the [Up arrow key] or [Down arrow key/Menu] key to display [Registration], and then press the [#Enter] key.

Maintenance:        
Registration        

4Press the [Up arrow key] or [Down arrow key/Menu] key to display [Pr.Test Pattern], and then press the [#Enter] key.

Registration:      
Pr.Test Pattern    

5Press the [Up arrow key] or [Down arrow key/Menu] key to select a paper tray, and then press the [#Enter] key.

Pr.Test Pattern:    
Tray 1              

A test pattern to adjust the print start position is printed.

Check the optimal adjustment values on the printed test pattern.

6Fold the test pattern sheet in half lengthwise.

illustration of registration

7The optimal adjustment value is the difference between the single vertical line and the cross's vertical line that you can see when the folded paper is held up to light. When the difference is one calibration mark in the "+" direction, the optimal adjustment value for the [Read Direction] is "+1.0".

illustration of registration

8Fold the test pattern sheet in half widthwise, and then check the adjustment value for the [Feed Direction].

Adjustment values are in 0.1 increments.

9Press the [Up arrow key] or [Down arrow key/Menu] key to display [Adjustment], and then press the [#Enter] key.

Registration:      
Adjustment          

10Press the [Up arrow key] or [Down arrow key/Menu] key to select a paper tray, and then press the [#Enter] key.

Adjustment:        
 Tray 1            

11Press the [Up arrow key] or [Down arrow key/Menu] key to enter the adjustment values (-4.0 to +4.0) in the [Read Direction] from Step 7, and then press the [#Enter] key.

Read Direction:    
(-4, +4)   0.0      

12Press the [Up arrow key] or [Down arrow key/Menu] key to enter the adjustment values (-4.0 to +4.0) in the [Feed Direction] from Step 8, and then press the [#Enter] key.

Feed Direction:    
(-4, +4)  0.0      

13Press the [Escape] key.