1Press the [Down arrow key/Menu] key.

2Press the [Up arrow key] or [Down arrow key/Menu] key to display [Maintenance], and then press the [#Enter] key.

Menu:              
Maintenance        

3Press the [Up arrow key] or [Down arrow key/Menu] key to display [Adj.Paper Feed], and then press the [#Enter] key.

Maintenance:        
Adj.Paper Feed      

4Press the [Up arrow key] or [Down arrow key/Menu] key to display [Pr.Test Pattern], and then press the [#Enter] key.

Adj.Paper Feed:    
Pr.Test Pattern    

A test pattern to adjust paper feed is printed.

5Check the optimal adjustment values on the printed test pattern.


The optimal adjustment value is the number that appears on the left of the lightest gray square with straight horizontal lines on both sides. When this number is "+2", the optimal adjustment value is "+2".

illustration of adjust paper feed

When horizontal lines beside the lightest gray square are broken, select the optimal adjustment value by referring to the lines broken in the opposite direction. When the "+2" square is the lightest gray square and the "+6" horizontal lines are broken in the opposite direction, the optimal adjustment value is between "+3" and "+5". After adjustment, check the adjustment result.

illustration of adjust paper feed

6Press the [Up arrow key] or [Down arrow key/Menu] key to display [Adjustment], and then press the [#Enter] key.

Adj.Paper Feed:    
Adjustment          

7Press the [Up arrow key] or [Down arrow key/Menu] key to enter the adjustment value (-14 to +14) from Step 5, and then press the [#Enter] key.

Adjustment:        
(-14, +14)     0    

8Press the [Escape] key.

Note

  • If black or white streaks still appear after the adjustment, keep adjusting the value by 1 and executing "Adjustment".

    • If black streaks appear, increase the adjustment value.

    • If white streaks appear, decrease the adjustment value.

  • Keep adjusting the value and executing "Adjustment" until the black or white streaks disappear.