Substrate: Allows to select the appropriate substrate that you will be sublimating. The substrates listed may differ slightly depending on the paper and speed that you have selected as well as the edition you are using. The Sawgrass edition is set by default.

  • Unisub Products: Select this substrate when you are using coasters or place mats of the Unisub brand 
  • Metal - White / Silver: Select this substrate when you are using white or silver metal panel
  • Metal - Gold: Select this substrate when you are using gold coloured metal panel
  • Acrylic: Select this substrate when you are using an acrylic block
  • Chromaluxe Products: Select this substrate when you will be pressing onto a metal panel of the Chromaluxe brand
  • Ceramic/Glass: Select this substrate when you will be pressing on to a mug, glass or ceramic tiles
  • Mousepad: Select this substrate when you will be pressing onto a mousepad
  • Polyester Fabric: Select this substrate when you will be pressing onto polyester fabric
  • Siser White Glitter: Select this substrate when you will be printing onto Sisier White Glitter Heat Transfer Vinyl
  • Textile: Select this substrate when you will be printing onto Sublitex paper
  • Duraluxe: Select this substrate when you will be pressing onto a metal panel of the Duraluxe brand
  • Chromaluxe EXT: Select this substrate when you will be pressing onto a metal panel of the Chromaluxe EXT brand
  • Heat Transfer Vynil (HTV): Select this substrate when you will be printing onto a Heat Transfer Vynil.

Paper: Allows to select the brand of paper onto which you are printing. The papers listed will differ depending on the edition you have set. The Sawgrass edition is set by default.

Print Quality: Allows you to set the print speed, High Speed (300DPI), High Quality (600DPI),  Advance Photo (1200DPI) or Ultra Fine Photo (SG500/1000 only). The substrate list will change depending on the selected speed and printer

Source: Allows you to select the source tray. You can set this to Auto, Tray 1, Tray 2 or Bypass Tray.

Mirror: This option is checked by default and will mirror the image when printing.