Follow the procedure below to adjust where to start printing on paper loaded in each paper tray after checking the test pattern printed.

  1. Press the [ Menu] key.
  2. Press the [▲] or [▼] key to display [Print Features], then press the [OK] 
  3. Press the [▲] or [▼] key to display [ListTest Prnt], then press the [OK]  
  4. Press the [▲] or [▼] key to display [Registration], then press the [OK]
  5. Press the [▲] or [▼] key to display [Pr.Test Pattern], then press the [OK] 
  6. Press the [▲] or [▼] key to select a paper tray, then press the [OK] 
  7. Press the [Print] selection key.
    A test pattern to adjust the print start position is printed.
    Check the optimal adjustment values on the printed test pattern

  8. Fold the test pattern sheet in half lengthwise.
  9. The optimal adjustment value is the difference between the single vertical line and the cross's vertical line that you can see when the folded paper is held up to light. When the difference is one calibration mark in the "+" direction, the optimal adjustment value for the [Read Direction] is "+1.0".

  10. Fold the test pattern sheet in half width wise, then check the adjustment value for the [Feed Direction].
    Adjustment values are in 0.1 increments.
  11. Press the [▲] or [▼] key to display [Adjustment], then press the [OK] key.
  12. Press the [▲] or [▼] key to select a paper tray, then press the [OK] 
  13. Press the [▲] or [▼] key to enter the adjustment values (-4.0 to +4.0) in the [Read Direction] from Step 7, then press the [OK] key.

  14. Press the [▲] or [▼] key to enter the adjustment values (-4.0 to +4.0) in the [Feed Direction] from Step 8, then press the [OK]