SG500 & SG1000

How to attach a Bypass Tray
 If the printer is powered on, press and hold down the [Power] key until it turns off and then unplug the power cord. Remove the sound barrier from the...
Wed, 14 Oct, 2020 at 5:53 AM
How to clean the paper feed belt
To clean the paper feed belt, we recommend you perform the following: 1. Open the top cover and rear door. 2. Clean the visible part of the paper feed ...
Wed, 15 Jul, 2020 at 11:46 AM
How to change the Energy Saver timer
Press the [Menu] key. Press the [▲] or [▼]key to display [System Settings], then press the [OK] key   Press the [▲] or [▼]key to display [Timer Settings]...
Thu, 16 Jul, 2020 at 5:04 AM
How to print a nozzle check
Follow the procedure below to print a nozzle check test pattern used to check if the print head nozzles are printing properly.  Press the [Menu] key. Pr...
Thu, 16 Jul, 2020 at 5:17 AM
How to perform a head clean
Follow the procedure below to perform a print head cleaning. Perform a head cleaning when print quality is affected by missing nozzles. Head cleaning cons...
Mon, 19 Oct, 2020 at 4:14 AM
How to perform a head flush
Follow the procedure below to perform a thorough print head cleaning. Perform a head flushing only if print head nozzles cannot be cleared by up to five (...
Thu, 16 Jul, 2020 at 5:41 AM
Wi-Fi Connectivity Explained
When connecting your SG500 or SG1000 printer to your network wirelessly, a few things should be kept in mind: Distance from printer to router does make a ...
Thu, 16 Jul, 2020 at 5:49 AM
How to connect to a wireless network
If you have decided that you wish to connect the printer wirelessly, you will first of all need to change the LAN Type to Wireless, then connect the printer...
Thu, 16 Jul, 2020 at 5:58 AM
How to check the IP address of the printer
Should you ever need to edit the IP address of the printer on your PC, you will first of all need to check the current IP address of the printer. In order t...
Thu, 16 Jul, 2020 at 6:00 AM
How to change LAN Types (Ethernet/Wireless)
Depending on whether you wish to connect the printer using an Ethernet cable or wirelessly, you will need to change the LAN type on the printer. Press the...
Thu, 16 Jul, 2020 at 6:04 AM