SG500 & SG1000

How to set a static IP address.
Press the [Menu] key. Press the [▲] or [▼]key to display [System Settings], then press the [OK] Press the [▲] or [▼]key to display [Interface Settings], ...
Thu, 16 Jul, 2020 at 6:06 AM
How To Setup The Printer
The below video will demonstrate how to setup your printer from start to finish Take off the protective covering. Remove the plastic bag Lift the ...
Thu, 12 Nov, 2020 at 10:56 AM
How do I check and perform the paper feed adjustment?
If printed horizontal lines are misaligned, print images are patchy, or streaks are printed at regular intervals, print a test pattern, then adjust the pape...
Thu, 16 Jul, 2020 at 6:10 AM
How to check and perform the print head position adjustment
Adjusts the print head. Perform this operation if printed lines are vertically misaligned. If there are several lines in the test pattern, check adjustment...
Thu, 16 Jul, 2020 at 6:14 AM
How to check and perform the registration adjustment
Follow the procedure below to adjust where to start printing on paper loaded in each paper tray after checking the test pattern printed. Press the [ Menu]...
Thu, 16 Jul, 2020 at 6:19 AM
Horizontal Banding/Lines
Horizontal lines or banding can be caused by one of the following: Incorrect settings Paper feed adjustments Missing or blocked nozzles Dirty capping s...
Tue, 13 Oct, 2020 at 4:00 AM
Vertical banding
Vertical banding is easier to diagnose than horizontal banding. There are only a couple of causes which are the following: Incorrect print head position a...
Thu, 16 Jul, 2020 at 7:53 AM
Missing Nozzles
Blocked nozzles appear as missing dashes/lines on the nozzle check print out. Below is an example of a complete nozzle check as well as a bad nozzle check. ...
Thu, 16 Jul, 2020 at 7:56 AM
Memory is insufficient
The "Memory is Insufficient" error is related to a paper jam or misfeed. As such, we recommend that you clear the message by pressing Exit, then...
Thu, 16 Jul, 2020 at 7:59 AM
Form Feed Error: Custom Size (IJ Plain) on LCD
If you are experiencing an issue where your SG500 or SG1000 printer is displaying an error on the screen similar to the following, please see the instructio...
Thu, 16 Jul, 2020 at 8:00 AM